|
|
Technical Application
• Home • Technical Application
Selected items added successfully in Inquiry Basket!
Selected items removed successfully in Inquiry Basket!
| Cold and Hot Water Distribution
Jindal MLC Pipes are non-toxic, corrosion resistant, light, mechanical strong and thermally resistant. They have low fragile humidity and long lifetime. Flowing resistance inside the pipe is small, scaling can rarely happen. The fluids cannot be contaminated. Effective diameters are big. O2 is 100% isolated and infiltration is thoroughly prevented The smooth inner layer of Jindal MLC pipes prevent deposit, accumulation and corrosion leading up to 30% - 50% more flow of fluid than in metal pipes. They are easy to bend & install directly on girder or inside wall and cement concrete. They can be easily detected with a simple metal detector. The combination of plastic and metal makes Jindal MLC pipes a permanently reliable system for its use in all common hot and cold water installations.
Solar System, Air Conditioning and Refrigeration System Frost Resistant
Jindal MLC pipes are the bad conductor of heat. Thermal conductivity is 0.45 watt/ [m deg k.] so thermal preservation is high. This lowers the cost of temperature keeping and improves the efficiency of these systems.
Medical, Foodstuff and Chemical Industry’s Pipe System
The inner and outer layers of Jindal MLC pipes are made of special PE with strong chemical, corrosion and contamination resistance. The aluminum core makes the pipe 100% gas and oxygen tight. Therefore, as medical and oxygen supply pipe, Jindal Multi layer Composite pipe is hygienic and leak-proof and ensures the purity of its carrying media. As a supply pipe for food industry, it can eliminate contamination during manufacturing. Furthermore, the static-free PE layers can also withstand all kinds of acid and alkali solution (in density) below 600C, which enables the pipe to be used in the chemical industry with no extra protection.
Gas Distribution
The aluminum layer allows Jindal MLC pipes to withstand high working pressure and prevent oxygen and gases from penetrating into the pipe. They are easily bent, which makes the use of numerous fittings unnecessary. Jindal MLC pipes are safe and reliable choice for compressed air, gas and oxygen supply.
Composite Pipe For Data Transmission, Telecommunication and signal Cables
Composite pipes are very effective as conduit compared to other pipes. Its uniqueness is in its three-layer construction, incorporating a welded sealed aluminum tube providing the very latest method of EMI screening covered both internally and externally with a layer of polyethylene. This gives the comparable strength to that of a metal conduit with the flexibility of a plastic conduit.
Shield effectiveness (attenuation in dB) is a measurement of the ratio between the external environment field strength and that field strength measured after passing through any material. This is recorded in a logarithmic scale.
Underfloor Heating System
Stable form in bends and over a distance; Jindal MLC pipes can be directly installed up to 200 meters without any fittings. It works well in a wide range of temperature from -400C to 950C.
|
| |
|
Products
